Onto the third set of pictures for the wooden external hard drive case. As of now all that really needs to be done is to stain the wood. Since I don’t have the stain I want to use at hand, that part is not complete yet. Since the last set, the attachment mechanism was figured out. Turns out wood glue works good for tapping wood for M3 screws. The activity and power LEDs were mounted together, and the polycarbonate window for them was placed in the case.
-John Havlik
Going To Use Some Wood Glue To Thread The Holes
Using Wood Glue To Thread The Wood
M3 Screw In Glue To Cast Threads
M3 Screw All The Way In
All Four M3s In Glue Waiting To Dry
Removing Screw After Glue Dried
The Glue Threaded Hole
Drilling Out The Power/Activity LED Hole
Frosted Polycarbonate Window For Activity/Power LED
Second View Of Frosted Window
Using A Little CA Glue As A Screw Locking Agent
Blue + White LED Joined By CA Glue